Description
2HP Variable Speed Swimming Pool Pump
Meet the Emaux EPV200, a 2HP variable speed swimming pool pump. Designed for all your pumping needs this variable speed pump is great for everything from traditional pools and spas to garden features like waterfalls and fountains.
Energy Efficient
The main characteristic of the EPV200 is its energy efficiency. Normal single-speed pumps run at their maximum speed continuously. This can be highly inefficient due to the large energy consumption. This results in a high running cost. By comparison, using this variable speed pump you can select one of four program speeds to match your ideal flow rate. By optimizing the pump speed and water flow you reduce your energy consumption.
For example, in a typical home installation, the maximum power would only be used when vacuuming the pool. The lowest power setting can be used overnight or when the pool is not in use while the two medium power settings can be used when the pool has been used during the day or in summer. And all of this can be done from the one-touch controller. It enables you to schedule the system with just the touch of a button.
Quiet Operation
Another great feature of this variable speed pump is the noise level. For the Emaux EPV200, this isn’t a problem. The advanced hydraulic design allows water to move through the pump more efficiently while the permanent magnet motor technology eliminates excessive motor noise. Altogether this allows for whisper-quiet operation.
To conclude the Emaux EPV200 is a fantastic pump that will suit a variety of needs. This 2HP variable speed pool pump can be used with heating and with alternative sanitation methods such as salt chlorination or a UV system. It’s programmable and could even save you money in the long run. If you are still unsure if this is the right pump for you do not hesitate to contact us and be sure the check the product information sheets and manuals.
Specification –
- 2 inch suction and discharge port with transparent lid
- Universal Union for 2″(63mm) & 2.5″(75mm)
- Pre filter with removable basket & Lock Ring Lid
- Basket Volume 5 litres
- Asynchronous Two poles
- Class insulation 130(B)
- IPX5 Waterproof standard
- Built-in thermal protection
- Overload protection
- SS 316 Stainless Shaft & Mechanical Seal Components
- Single Phase – Standard 13A UK Plug
- Self-Priming up to 2.5m above water level
- Testing Pressure 50PSI (3.5 Bar)